Packer is a common way in modern packaging. The simple and light packaging of packer will not bring extra burden to handling and storage. Therefore, packer is an indispensable equipment for packaging in food, electronics, beverage, washing and care, cosmetics and other industries. In the process of daily use of the packer, the following problems are easy to appear. Let's learn about them.

 The temperature rise of the packer is slow or can not reach the standard packaging temperature: the above problems will lead to the packaging effect of the packer can not reach the expected. The heating process depends on the heater, so the main power circuit of the heater should be checked first to check whether the contacts of the magnetic switch are normal. If the magnetic switch is normal, check the meter again to see if the ohmic value of each phase is the same as that of the machine. Normal is short circuit. If all phases are connected, but the circuit or electric heating tube is still abnormal, the heater is damaged, and a new heater can be replaced.

The packer can not detect the product: the consequence of not detecting the product is that the product is damaged and the packaging work cannot be carried out normally. In this case, the gap in the middle of the combined packaging products affects the detection of the electric eye, so it is only necessary to adjust the detection angle of the electric eye to an oblique angle.

The film material of the baler is easy to offset and cannot be fed normally: the above situation can be solved by adjusting the position of the film roll and the tension balance bar, and the adjustment is invalid, and then adjust the angle of the upper triangular plate.

The above is the use of the packer is prone to problems, I hope to be able to help you, if there is anything you do not know can directly communicate with our customer service, we are dedicated to your service, thank you for watching.